40 Express Standard Features

Hull
 Bottom paint: two coats anti-fouling
 Fully laminated stringer reinforcement system
 Gel coated finished bilge
 Hand-laid bi-axial fiberglass construction
 Painted boot stripe
 Polished stainless Topaz® logo
 Premium gel coat
 Premium resins
 Steel engine mounts

Deck
 Balsa core construction
 Bi-axial stitched fiberglass construction
 Cleats – 10” stainless steel: stern
 Custom welded aluminum bow rail
 Integral bow pulpit with roller
 Molded-in skid resistant deck surface
 Pop-up cleats - 10” stainless steel: bow/springline
 Premium gel coat
 Stern hawse pipes – stainless steel

Cockpit
 Bait prep center with sink and storage
 Bilge access hatch
 Courtesy lighting
 Custom switch panel for cockpit systems
 Drainage covers (removable) – stainless steel
 Fishboxes (2) with overboard drain/macerator pump
 Fitted coaming pads
 Fresh water washdown
 Raw water washdown
 Recirculating baitwell
 Rod holders (4) – stainless steel
 Self-bailing cockpit
 Tackle storage cabinet
 Transom door with lift gate

Helm/Bridgedeck
 Audible engine warning system
 Bench seating
 Custom gauge panel
 Custom helm wheel
 Custom single lever controls
 Custom switch panel
 Electric tilt center window vent
 Full engine illuminated instrumentation
 High water indicator lights (2)
 Hinged console pad
 Hydraulic lift engine access
 Illuminated flush mount compass
 Ladder back helm/companion chairs
 Manual engine inspection hatch
 Molded electronics panel
 Stereo – remote control
 Storage compartment (2)
 Tinted safety glass windshield in welded heavy
    duty aluminum frame
 Weather resistant switches

Main Cabin
 110V outlet with safety GFI protection
 Access hatch, bilge (2)
 Custom dinette table
 Custom wood cabinets and drawers with
    positive latches
 Corian counter tops
 Designer fabrics and wall coverings
 Dual burner electric cook top
 DVD player
 Freezer  (12V DC)
 Large locker storage
 Lighting – recessed halogen
 Microwave oven 
 Polished, stainless sink and designer faucets
 Private forward stateroom:
    Anchor locker access panel
    Built-in dresser
    Deck hatch with privacy screen
    Hanging locker
    Large berth
    Reading lights
    Rod storage locker
 Refrigerator (12V DC)
 Removable carpet
 Sliding cabin entry door
 Stereo –  AM/FM/CD with 8 speakers
 Teak and holly sole
 Television – flatscreen
 U-shaped dinette converts to berth – sleeps two
 Upholstered headliner

Head
 Custom mirrored medicine cabinet
 Duplex outlet (110V) at vanity, with safety GFI protection   exhaust fan (12V)
 Head and shower – molded fiberglass construction with    skid resistant surfaces
 Macerator with overboard discharge
 Sink with designer faucets – polished stainless
 Stall shower with glass door
 Towel rack and tissue holder
 Vacuum  flush head system with dockside discharge
 Vanity with Corian top
 Waste level gauge
 Waterproof lighting

Water System
 Central drain system (no side thru-hull fittings)
 Dockside water inlet
 Fresh water spigot in engine room
 Fresh water tank (60 gal.)
 Fresh water washdown
 Holding tank (25 gal.) with gauge, macerator, overboard    and dockside discharge
 Hot and cold running water to shower, vanity sink, and    galley sink
 Raw water wash down
 Water heater – stainless steel

Electrical
 110V GFI outlet in engine room
 6.5 kw diesel generator with sound shield
  – fresh water cooled
 50 amp charger/shore power with 50’ cord
 AC electrical switch panel with load meter
 Air conditioning – reverse cycle heat
 Batteries – heavy-duty 8D
 Battery on/off switches – vapor proof (w/keys)
 Battery paralleling switch – vapor proof
 Bonded electrical system
 Circuit breaker protection
 Coded wire harness and circuit breaker system
 Converter/battery charger
 DC electrical panel with load breaker
 Dyna-plate
 Easy access hinged distribution panel
 Engine room lighting
 International navigational lights

Safety Equipment
 Anchor with chain and line
 Automatic CO2 fire extinguisher system in engine
  compartment
 Braided dock lines – 5/8”
 Dock lines with fenders
 Fire extinguisher - hand-held
 First aid kit
 Flare gun and distress flares
 Life jackets and throwable PFD (USCG approved)

Mechanical
 2” stainless steel propeller shafts
 4-blade Nibral® propellers (2)
 Aircraft quality fuel lines and fittings
 Aluminum fuel tanks – epoxy coated (600 gal.)
 Anchor windlass  electric heavy-duty
 Automatic oil change system, engines and generator
 Bilge pumps (3) – automatic and manual (12V)
 Bonding system – transom zinc plates
 Bronze thru-hull fittings with seacocks
 Double hose clamps used throughout – stainless steel
 Double T-clamps on engine
 Dripless shaft logs
 Dual 12V bilge blowers
 Dual horns
 Engine air separators
 Engine hour meters (2)
 Engine mount vibration isolators
 Engine mounts – heavy-duty encapsulated steel
 Engine room insulation – thermal and acoustical
 Fiberglass exhaust system
 Fresh water cooled engines and generator
 Fuel filters/separators (Racor®) – engines and generator
 Full length fiberglass exhaust system with dual
  exhaust mufflers
 Fully recessed trim tabs
 High density rub rail – stainless steel insert
 Heavy duty bronze rudders and struts (oversized)
 Hydraulic steering
 Recessed transom zinc
 Sea strainers

Head
 Custom mirrored medicine cabinet
 Duplex outlet (110V) at vanity, with safety GFI
    protection exhaust fan (12V)
 Head and shower – molded fiberglass construction
    with skid resistant surfaces
 Macerator with overboard discharge
 Sink with designer faucets – polished stainless
 Stall shower with glass door
 Towel rack and tissue holder
 Vacuum  flush head system with dockside discharge
 Vanity with Corian top
 Waste level gauge
 Waterproof lighting

Water System
 Central drain system (no side thru-hull fittings)
 Dockside water inlet
 Fresh water spigot in engine room
 Fresh water tank (60 gal.)
 Fresh water washdown
 Holding tank (25 gal.) with gauge, macerator,
    overboard and dockside discharge
 Hot and cold running water to shower, vanity sink,
    and galley sink
 Raw water wash down
 Water heater – stainless steel

Electrical
 110V GFI outlet in engine room
 6.5 kw diesel generator with sound shield
  – fresh water cooled
 50 amp charger/shore power with 50’ cord
 AC electrical switch panel with load meter
 Air conditioning – reverse cycle heat
 Batteries – heavy-duty 8D
 Battery on/off switches – vapor proof (w/keys)
 Battery paralleling switch – vapor proof
 Bonded electrical system
 Circuit breaker protection
 Coded wire harness and circuit breaker system
 Converter/battery charger
 DC electrical panel with load breaker
 Dyna-plate
 Easy access hinged distribution panel
 Engine room lighting
 International navigational lights

Safety Equipment
 Anchor with chain and line
 Automatic CO2 fire extinguisher system in
    engine compartment
 Braided dock lines – 5/8”
 Dock lines with fenders
 Fire extinguisher - hand-held
 First aid kit
 Flare gun and distress flares
 Life jackets and throwable PFD (USCG approved)

Mechanical
 2” stainless steel propeller shafts
 4-blade Nibral® propellers (2)
 Aircraft quality fuel lines and fittings
 Aluminum fuel tanks – epoxy coated (600 gal.)
 Anchor windlass  electric heavy-duty
 Automatic oil change system, engines and generator
 Bilge pumps (3) – automatic and manual (12V)
 Bonding system – transom zinc plates
 Bronze thru-hull fittings with seacocks
 Double hose clamps used throughout – st. steel
 Double T-clamps on engine
 Dripless shaft logs
 Dual 12V bilge blowers
 Dual horns
 Engine air separators
 Engine hour meters (2)
 Engine mount vibration isolators
 Engine mounts – heavy-duty encapsulated steel
 Engine room insulation – thermal and acoustical
 Fiberglass exhaust system
 Fresh water cooled engines and generator
 Fuel filters/separators (Racor®) – engines and
    generator
 Full length fiberglass exhaust system with dual
    exhaust mufflers
 Fully recessed trim tabs
 High density rub rail – stainless steel insert
 Heavy duty bronze rudders and struts (oversized)
 Hydraulic steering
 Recessed transom zinc
 Sea strainers

 


login
web services by: KNOWLEDGEGUARD